Portable high pressure floating pump GEYSER

The device can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.

Accessories:

• Power bank with JUMP STARTER function with a total capacity of 10,000 mAh
• Connection cable for electrical start
• Charging source

Application:

This portable pump can be used by professional and volunteer firefighters, to places where it is necessary to transport water with greater elevation, for example during forest fires or any other difficult terrain. 
The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft passes through the pump chamber via a ceramic seal, which prevents water from flowing around the shaft to the motor.  The underside of the pump chamber is fitted with an aluminium cover. The bottom side of the block is fitted with a cover to prevent debris and particles over 5 mm in diameter. The delivery outlet is fitted with a Storz C52 (2’’) hose coupling. 

The float body is made of polyethylene by centrifugal injection as one block. The design of the float features outstanding stability on the water surface. The two handles are used for carrying, handling and also for fastening the cord to protect against swimming. The engine of this pump is equipped with a handle also, which can be used to remove the unit from the floater and manipulate the pump. The 5 liter fuel tank is attached to the floater and connected to the engine's fuel pump. 
The 2-stroke engine with a volume of 124 cc and an output of 8 HP is equipped with a manual and electric starter. The power bank with the JUMP STARTER function with a total capacity of 10,000 mAh will make it much easier to start the pump motor. The starter source can also be used as a backup to charge phones, laptops and other electronic devices. It includes a connection cable between the power bank and the connector of the motor circuit and charging source. 

Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!

Main specifications: