Fire nozzles PH-TURBO C52

This nozzle is designed for spraying with full or shower water or foam. It is mainly used to extinguish dusty and easily boilable substances e.g. coal, flour. Particularly advantageous use of the C52 is on coal-coating routes in the power industry, coal boiler houses, agricultural buildings and when fighting forest fires. When extinguishing residential fires, we recommend the use of spray mist, which allows maximum extinguishing effect with minimal water consumption, thus minimizing subsequent damage during the intervention. The advantage for firefighters is the ability to close and open the jet line at any time at a set flow.
 

The PH-TURBO C52 spray gun consists of a spray gun body, a three-point control lever, a ball cap, a control ring for adjusting the water quantity, a rotatable rubberised aluminium alloy head, a rotatable swivel spout fitted with a bearing and a pistol grip. A pulley lever can be used to close or open the ball valve of the jet line. The swivel head can be used to continuously change the shape of the jet from full, through narrow to orifice jet. The control ring is used to adjust the water quantity in 4 ways and to flush the jet. The outlet of the jet is equipped with a jet swirl and a thread for attaching the foaming attachment. The spout is rotatable and fitted with a fixed pressure coupling C52. The PH-TURBO C52 heavy foam attachment, which is only for the PH-TURBP C52, can be attached to the jet head.
 

Current: Type 3
Weight: 2,44 Kg
Dimensions LxHxW: 285x260x110 mm
Max. working pressure: 1,6 MPa
Flow rates at 0,6 MPa ref.pressure: 100,250,350,500 l/min

Cat.no. poh 002

Fire nozzle PH-TURBO D25 is certified according to EN 15 182-2