Fire Nozzle PH-TURBO HS7 D25

This nozzle is designed for spraying water with a full or shower jet. It is mainly used to extinguish dusty and easily ignitable substances (e.g. coal, flour, etc.). Particularly advantageous use of the jet is on the coal-coating routes in the power industry, coal boiler houses, agricultural buildings and when extinguishing forest fires. When extinguishing residential fires, we recommend the use of spray mist, which allows maximum extinguishing effect with minimum water consumption, thus minimizing subsequent damage during the intervention.

The HS7 D25 Al alloy fire nozzle consists of a nozzle body and a rotatable rubberised head. The swivel head allows the nozzle to be closed and the jet shape to be continuously changed from full, through narrow to orifice jet. The rubberised head body is fitted with projections which serve to spray (splash) the water in the shower stream. There is a 1" male thread at the inlet of the jet fitted with a D25 fixed pressure coupling.  

Technical data:

weight: 0,465 kg 
dimensions max. length: 260 mm
max diameter: 60 mm
max. working pressure: 1,6 MPa

Maintenance instructions:

The flowmaker does not require special maintenance. We recommend checking the condition of the jet after use to make sure it is not damaged. We recommend rinsing the jet after use and flushing it with clean water to remove dirt.